Multi-blade saw ruwan wukake ana ganin ruwan wukake da aka girka kuma ana amfani da su tare da ruwan wukake masu yawa, gabaɗaya gami da gani ruwan wukake.

1. Multi-blade saw ruwan wukake ne dace da a tsaye yankan na m itace, kuma za a iya amfani da su a cikin kungiyoyi don inganta yadda ya dace. Kyakkyawan sakamako na yankan kuma mai dorewa.

2. Diamita na waje na nau'i-nau'i masu yawa: ya dogara ne akan iyakar shigarwa na na'ura da kauri na kayan yankan. Ƙananan diamita shine 110MM, kuma babban diamita zai iya kaiwa 450 ko mafi girma. Ana buƙatar sanya wasu igiyoyin gani sama da ƙasa a lokaci guda bisa ga buƙatun injin. , ko shigar da hagu da dama a lokaci guda, don cimma mafi girman kauri ba tare da ƙara diamita na babban tsintsiya ba da kuma rage farashin kayan zaren.

3. Yawan haƙoran ƙwanƙolin ƙwanƙwasa: Don rage juriya na injin, ƙara ƙarfin tsinken tsintsiya, da rage hayaniya, yawan haƙoran ƙwanƙolin tsintsiya madaurinki ɗaya an tsara su don zama. kaɗan, kuma diamita na waje na 110-180 shine 12-30 kuma waɗanda ke da haƙora sama da 200 gabaɗaya kusan 30-40 ne kawai. Lallai akwai injuna tare da mafi girma iko, ko masana'antun da suka jaddada yankan effects, da kuma kananan adadin kayayyaki ne game da 50 hakora.

Na hudu, kauri daga cikin ruwan wukake mai yawa A cikin ka'idar, muna fatan cewa mafi ƙarancin tsinken gani, mafi kyau. Kerf ɗin sawing shine ainihin nau'in amfani. Abubuwan da ake amfani da su na alloy saw ruwa tushe da kuma aiwatar da masana'anta da kayan aiki suna ƙayyade kauri daga cikin ganuwar. Idan kauri yana da bakin ciki sosai, igiyar gani yana da sauƙin girgiza lokacin da yake aiki, wanda zai shafi tasirin yankewa.

5. Ƙaƙƙarfan buɗaɗɗen nau'i-nau'i masu yawa: ya dogara da buƙatun na'ura, saboda an shigar da nau'i mai yawa tare. Don tabbatar da kwanciyar hankali, buɗewar ƙirar gabaɗaya ta fi girma fiye da na kayan gani na al'ada. Yawancinsu  suna ƙara buɗewa da shigar da na musamman An tsara flange tare da maɓalli don sauƙaƙe ƙari na sanyaya don sanyaya da haɓaka kwanciyar hankali. Gabaɗaya, buɗaɗɗen ganga diamita na 110-200MM yana tsakanin 35-40, buɗewar diamita na waje mai tsayi 230-300MM yana tsakanin 40-70, kuma tsinken gani sama da 300MM gabaɗaya ƙasa da 50MM.

6. Siffar haƙori na ƙwanƙolin ruwan wukake da yawa galibi ana canza haƙoran hagu da dama, kuma an ƙirƙira ƴan ƙananan igiyoyin gani masu girman diamita su zama haƙoran lebur.

7. Rufi na Multi-blade saw ruwan wukake: Bayan waldi da kuma nika na Multi-blade saw ruwan wukake, shafi magani ne gaba daya da za'ayi, wanda aka ce tsawaita rayuwar sabis. A gaskiya ma, shi ne yafi ga kyawawan bayyanar da kayan aiki, musamman tare da scrapers na Multi-blade saw ruwa , halin yanzu matakin waldi, akwai alamun walƙiya a bayyane a kan scraper, don haka an rufe shi don kiyaye bayyanar. .

8. Multi-blade saw ruwa tare da scraper: The ruwa na Multi-blade saw ana welded da wuya gami a kan tushe na saw ruwa, gaba ɗaya ake magana a kai a matsayin scraper.

An raba scrapers gabaɗaya zuwa juzu'i na ciki, scraper na waje da goge hakori. Ana amfani da scraper na ciki gabaɗaya don yanke katako, ana amfani da na'urar bushewa gabaɗaya don yankan itacen jika, kuma ana amfani da gogewar haƙori don gyara gefuna ko baƙar fata, amma ba za a iya haɗa su gaba ɗaya ba.

Wurin gani mai yawa-blade tare da scraper wani yanayi ne. Kamfanonin ƙasashen waje sun ƙirƙira ma'aunin tsintsiya madaurinki-daki tare da scraper a baya. Lokacin yankan rigar itace da katako mai wuya, don samun sakamako mai kyau na yankewa, rage ƙona igiyar ganimar, ƙara ƙarfin cire guntu na injin, rage yawan lokutan niƙa, da haɓaka ƙarfin aiki.

Duk da haka, yana da wuyar gaske don ƙwanƙwasa ƙwanƙwasa nau'i-nau'i masu yawa tare da scrapers, kuma kayan aiki na yau da kullum ba za a iya kaifi ba, kuma farashin yana da girma.