Cold Saw Blades an ƙera su don yanke ƙarfe na ƙarfe da mara ƙarfe. Cold Saw ruwan wukake an yi su ne daga karfe M2 HSS da M-35 (5% cobalt) don bakin karfe da kayan aiki. Wuraren mu na sanyi suna da zafi da aka bi da su zuwa 64-65 HRc kuma mai zafi sau uku kuma an kashe don tabbatar da kwanciyar hankali. Waɗannan ruwan wukake sun dace musamman don amfani akan kayan aikin hannu, Semi-atomatik da cikakken saƙon sanyi na atomatik. Sanyi sawn ruwan sanyi suna aiki a jinkirin gudu yawanci 10-50 RPM lokacin yankan ƙarfe na ƙarfe amma suna iya gudu da sauri lokacin yanke ƙarfe mara ƙarfe. Ana ba da shawarar mai sanyaya ambaliya ko aƙalla feshin hazo don ingantacciyar ingancin yanke da rayuwar ruwa. Lokacin yin oda don Allah saka nau'in kayan da ake yanke don samar da madaidaicin lissafin haƙori don aikinku.

Cold Saw Blades suna samuwa tare da suturar PVD haka kuma PVD kayan kwalliya suna haɓaka taurin saman kuma suna ba da damar haɓaka gudu da ciyarwa. Tsarin PVD da ya dace yana ƙaddara ta hanyar yanke kayan, ana amfani da gani da kuma hanyar aikace-aikacen coolant misali. ambaliya, hazo ko babu mai sanyaya.

Aikace-aikace:

Cold saw ruwan wukake yawanci amfani da su yanke tube, bututu, m mashaya, kwana baƙin ƙarfe, simintin gyaran kafa, forgings, tsarin siffofi, billets da dai sauransu.

Amfani:

The sawing gudun ne da sauri, da yankan yadda ya dace da aka gyara, da kuma aiki yadda ya dace ne high; Ƙaƙwalwar igiyar gani yana da ƙasa, ɓangaren bututun ƙarfe da za a yi amfani da shi ba shi da burrs, an inganta daidaitattun kayan aiki, kuma an inganta rayuwar sabis na igiya.

Bayani:

Diamita na waje na katako: 50-650 mm; Taurin tsintsiya shine HRC 65;

Note: Za a iya musamman bisa ga abokin ciniki ta bukatun.

Ajiye Mana Layi

Da fatan za a yi sako kuma za mu dawo gare ku!

Aika