As a processing tool often used in the wood industry, multi-blade saw blades often cause injuries to people and cause losses to enterprises due to improper operation of workers due to their high-speed operation. So how can we reduce and avoid such accidents?

We need to understand the saw blade. The saw blade is composed of several teeth. The saw teeth are sharp and the number of teeth is not missing.Saw blade intact is the basic requirement of use ,if there is a missing tooth shall not be continuous missing teeth ,and in the practical process, If the board has cracks, it needs to be terminated. In addition, the end of the saw blade is usually punched by the manufacturer to stop the crack. If there is no crack hole, it cannot be used, especially on the multi-blade saw.

On the premise of ensuring that the saw blade meets the above conditions, we can start the operation. Before the formal sawing of wood, it is necessary to ensure that the saw blade rotates normally, and the wood must not vibrate. In case of hard wood knots, feed at a constant speed . The feeding system of the multi-blade saw is a uniform speed feeding, which can be avoided.

When the temperature of the saw blade is too high, it needs to be cooled with cold water, and the speed of the saw blade with a diameter of more than 600mm reaches 2000 rpm, and it needs to be cooled by spraying water. After the work is completed, press the emergency stop button and turn off the main switch.

In addition, if you do not use a multi-blade saw, but use manual operation, you need to pay attention to the slow adjustment if the saw path deviates, and do not forcefully pull the saw blade to prevent danger. The equipment with exposed saw blades requires operators and related personnel not to stand in the direction of the centrifugal force facing the rotation of the saw blades, and the arms cannot work across the saw blades.