1. Before turning on the machine, clean the area around the sliding table saw and workbench. Check that the saw blade is straight. When sawing a large area of wood, put the wood on the push table, flush with the reference baffle, adjust the positioning baffle, and then fix the wood firmly with a wooden frame. Turn on the switch and feed the pusher at a constant speed. Not too hard or too fast. Operators should wear masks and noise reduction earmuffs. Gloves and loose clothing are not permitted. Long hair needs to be pulled up. When the saw blade is rotating, it is inconvenient to directly take out the wood next to the saw blade by hand. Push it out of the way with other longer pieces of wood if necessary.

2. When sawing small-sized wood, move the push table to a position that does not affect the operation, adjust the distance from the backing, turn on the switch and feed at a constant speed. After sawing the wood for a short time, use the push rod to push the remaining wood onto the saw blade (depending on the distance between the wood to be processed and the saw blade). Using a push rod when cutting and grooving wood is largely accident-avoidable.

3. When the cutting surface is too rough or has a peculiar smell, it should also be closed before inspection and maintenance.

4. The chip removal groove and listening device of the precision panel saw should be cleaned and maintained frequently to eliminate slag accumulation to ensure its flatness. Special reminder: If the precision panel saw is dry cutting, do not cut continuously for a long time to avoid damage to the saw blade. Use water cutting wet saw blades to prevent leakage

5. When cutting aluminum alloy and other metals, special cooling and lubricating fluid should be used to prevent the saw blade from overheating and jamming, which will affect the cutting quality of the panel saw.

6. When using a woodworking precision panel saw, the workpiece should be in a fixed state, and the profile positioning should be fixed in strict accordance with the cutting direction. The feeding should be balanced and powerful, without side pressure or curved cutting, and without impact contact with the workpiece, so as to avoid damage to the saw blade or flying out of the workpiece to cause safety accidents. When starting or ending a cut, do not feed too fast to avoid breaking teeth or damaging the precision panel saw blade.

7. If there is abnormal noise or vibration during the use of the woodworking precision panel saw, the operation of the equipment should be stopped immediately, and the fault should be checked for maintenance.