PCD Saw Blade
PCD wuxuu arkay Blade Qalabka goynta ugu xoogan
- Fasalka: Xirfadle Saw Blade
- Codsiga: Qoryaha iyo aluminium ee Mass ama hawlgallada goynta joogtada ah
- Qalabka: PCD (Diyaaman Polycrystalline) oo la tiriyey
- Tusaalooyinka bilaashka ah: Bixi
- Soo dir iimayl
PCD wuxuu arkay Blade Qalabka goynta ugu xoogan
PCDgarbaha miinshaarku waa doorasho aad u fiican marka la gooyo engegnaanta xooggan iyo mugga weyn ee homogenemaaddada ous. Ssida: samaynta alaabta gurigaGuddiga CNCgoynta arkay, wax soo saarka ganacsiga gaarka ahwaayoalbaabada aluminium,Daaqadaha iyoextrusion aluminium buundada jabay goyn, xaaladahani waa tiro badan oo goyn,ueeg PCD-gu wuu awoodaaiska ilaaliisbeddelka soo noqnoqda ee daab miinshaar, iyo sababta oo ah daab PCD si ay u awoodaan in ay sii joogaan fiiqan miinshaar muddo dheer, si ay waqti dheer ilaalin kartaa tayada goynta xasilloon.
Iliga PCD-ga miinshaar:
Shididda Sare ee Filat
Tilmaamaha noocyada kala duwan ee cawska PCD
Daab miinshaar PCD loogu talagalay Goynta Aluminium
| Dhexroor kabaxsan (mm) | Kerf(mm) | Godka Dhexe (mm) | Nambarka Ilkaha (T) | Qaabka Ilkaha |
| 255 | 3.0 | 25.4 | 100 | Trapezoid iyo Flat |
| 305 | 3.0 | 25.4 | 112 | Trapezoid iyo Flat |
| 355 | 3.2 | 25.4 | 120 | Trapezoid iyo Flat |
| 405 | 3.4 | 25.4 | 120 | Trapezoid iyo Flat |
| 450 | 4.0 | 30 | 120 | Trapezoid iyo Flat |
| 500 | 4.4 | 30 | 120 | Trapezoid iyo Flat |
| 550 | 4.8 | 30 | 140 | Trapezoid iyo Flat |
| 600 | 4.8 | 30 | 144 | Trapezoid iyo Flat |
Xusuusin: Waxa lagu beddeli karaa si waafaqsan shuruudaha macmiilka.
PCD wuxuu arkay daab loogu talagalay cabbiridda guddiga
| Dhexroor kabaxsan (mm) | Kerf(mm) | Godka Dhexe (mm) | Nambarka Ilkaha (T) | Qaabka Ilkaha |
| 300 | 3.2 | 30 | 72 | Trapezoid iyo Flat |
| 300 | 3.4 | 30 | 84 | Trapezoid iyo Flat |
| 300 | 3.2 | 60 | 96 | Trapezoid iyo Flat |
| 350 | 3.5 | 30 | 72 | Trapezoid iyo Flat |
| 350 | 3.5 | 30 | 84 | Trapezoid iyo Flat |
| 355 | 4.4 | 65 | 72 | Trapezoid iyo Flat |
| 355 | 3.2 | 30 | 84 | Trapezoid iyo Flat |
| 400 | 4.4 | 60 | 96 | Trapezoid iyo Flat |
| 450 | 3.6 | 40 | 72 | Trapezoid iyo Flat |
Xusuusin: Waxa lagu beddeli karaa si waafaqsan shuruudaha macmiilka.
PCD wuxuu arkay daab loogu talagalay alwaaxyada alwaaxyada iyo iskutallaabta goynta alwaax adag
| Dhexroor kabaxsan (mm) | Kerf(mm) | Godka Dhexe (mm) | Nambarka Ilkaha (T) | Qaabka Ilkaha |
| 255 | 3.0 | 25.4/30 | 100/120 | Bevel Top Bevel |
| 300 | 3.0/3.2 | 25.4/30 | 100/120 | Bevel Top Bevel |
| 350 | 3.0/3.2 | 25.4/30 | 100/120 | Bevel Top Bevel |
| 400 | 3.2/3.4 | 25.4/30 | 100/120 | Bevel Top Bevel |
Xusuusin: Waxa lagu beddeli karaa si waafaqsan shuruudaha macmiilka.
Khadka Noogu Tuur
AALADAHA LA XIRIIRA
Kudar
Xiriirinta waxtarka leh
Tag Cloud
