I-Cold Saw Blades yenzelwe ukusika iintsimbi ezine-ferrous kunye ne-non-ferrous. I-Cold Saw blades yenziwe ngentsimbi ye-M2 HSS kunye ne-M-35 (5% ye-cobalt) yeentsimbi ezingenasici kunye nesixhobo. Iiblades zethu ezibandayo ziphathwa ubushushu ukuya kwi-64-65 HRc kunye nokucaphuka kathathu kwaye ucinezele ucime ukuqinisekisa ukuba caba. Ezi blades zilungele ngokukodwa ukusetyenziswa kwi-manual, i-semi-automatic kunye neesarha ezibandayo ezizenzekelayo. Iiblade zesarha ezibandayo zisebenza ngesantya esicothayo ngokuqhelekileyo i-10-50 RPM xa kusikwa isinyithi esinentsimbi kodwa sinokubaleka ngokukhawuleza xa sisika isinyithi esingeyoron. Isipholisi sezandyondyo okanye isitshizi senkungu sinconywa kakhulu ngowona mgangatho uphezulu wokusikwa kunye nobomi beblade. Xa u-odola nceda uchaze uhlobo lwemathiriyeli esikwayo ukuze ijiyometri yezinyo echanekileyo inikwe umsebenzi wakho.

Cold Saw Blades ziyafumaneka kunye PVD ukutyabeka ngokunjalo PVD ukutyabeka kwandisa umphezulu ubulukhuni kwaye ivumela ngezantya okwandisiweyo kunye feed. Ukwaleka okufanelekileyo kwePVD kumiselwa yimathiriyeli esikwayo, isarha esetyenziswayo kunye nendlela yokufakwa kwesipholisi umz. isikhukula, inkungu okanye akukho nto yokupholisa.

Isicelo:

I-Cold saw blades ngokuqhelekileyo isetyenziselwa ukusika ityhubhu, umbhobho, ibha eqinileyo, i-angle iron, casting, forgings, iimilo zesakhiwo, iibhilithi njl.

Inzuzo:

Isantya se-sawing sikhawuleza, ukusebenza kakuhle kokusika kuphuculwe, kwaye ukusebenza kakuhle kuphezulu; i-saw blade deflection iphantsi, icandelo lombhobho wensimbi oza kuhlanjululwa alikho i-burrs, ukuchaneka kokuchaneka kwe-workpiece kuphuculwe, kwaye ubomi benkonzo ye-saw blade bukhulu.

Inkcazo:

I-diameter yangaphandle ye-saw blade: 50-650 mm; ubunzima be-saw blade yi-HRC 65;

Qaphela: Inokwenziwa ngokweemfuno zomthengi.

Siwise umgca

Nceda uthumele umyalezo kwaye siza kubuyela kuwe!

Thumela