1. In order to improve the output rate and reduce unnecessary wear of the saw blade, please pay attention to the placement and reliable fixing of the blocks.

2. When sawing, sparks are generated due to the strong impact and friction between the cutter head and the stone to cause heat, and sufficient cooling water is required for cooling. Insufficient water will cause burning of the cutter head, so it is necessary to ensure sufficient water supply without interruption.

3. Add lubricating fluid according to the amount and time. Sufficient lubrication can reduce friction, reduce noise, improve productivity and prolong the service life of saw blades.

4. When sawing stones of different materials, according to the change of the main motor current, please adjust the sawing depth and sawing speed in a timely manner.

5. During the sawing process, pay attention to the change of the sawing sound and the change of the current at any time. If there is any abnormality, it should be eliminated in time.

6. Monitor the quality of the sawn wool board, and timely check and deal with its influencing factors according to the degree and quantity of the wool board out of tolerance.

7. When removing the saw blade for storage, in order to reduce deformation, it should be hung vertically.