The requirements for using flying saw blades are: 

1.When working, the parts must be sure to be fixed, and the positioning of the profile must be in line with the cutting direction to avoid abnormal cutting. Do not use side pressure or curve cutting. The cutting must be smooth to avoid impactful contact of the blade with the parts, resulting in The saw blade is damaged or the workpiece flies out, causing an accident. 

2.When working, if you find abnormal sound and vibration, rough cutting surface, or odor, stop the operation immediately, check in time, and troubleshoot to avoid accidents. When starting and stopping cutting, do not feed too fast to avoid tooth breakage and damage.

3.If you are cutting aluminum alloy or other metals, use special cooling lubricant to prevent the saw blade from overheating and producing paste, which affects the quality of the cut. 

4.The chip discharge chute and slag suction device of the equipment must be smooth to prevent slag from accumulating into blocks and affecting production and safety. 

5.When dry cutting, do not cut continuously for a long time to avoid affecting the service life and cutting effect of the saw blade; when cutting wet sheets, you need to add water to cut to prevent leakage.