1. How to install the grinding wheel
Whether it is a cutting blade or a grinding blade, you must make sure it is installed correctly when fixing it, and check whether the bearing and nut lock ring are adjusted correctly. Otherwise, the installed grinding wheel may be unbalanced, shake or even knocked during work. Check that the diameter of the mandrel must not be less than 22.22 mm, otherwise the grinding wheel may be deformed and damaged!
2. Cutting operation mode
The cutting blade must be cut at a vertical angle of 90 degrees. It needs to move forward and backward when cutting, and cannot move up and down to prevent overheating caused by the large contact area between the cutting blade and the workpiece, which is not conducive to heat dissipation.
3. Cutting depth of cutting parts
When cutting the workpiece, the cutting depth of the cutting blade cannot be too deep, otherwise the cutting blade will be damaged and the center ring will fall off!
4. Grinding disc grinding operation specifications
5. Recommendations for cutting and polishing operations
In order to ensure safe and effective construction operations, please make sure before operation:-The grinding wheel itself is in good condition and the power tool's guard is securely installed.- Employees must wear eye protection, hand protection, ear protection and work clothes.- The grinding wheel is installed correctly, firmly and stably on the power tool, while ensuring that the speed of the power tool is not higher than the maximum speed of the grinding wheel itself.-Grinding wheel discs are products purchased through regular channels with manufacturer quality assurance.
6. The cutting blade cannot be used as a grinding blade.
-Do not use excessive force when cutting and grinding.
-Use suitable flanges and do not damage them.
-Before installing a new grinding wheel, be sure to turn off the power tool and unplug it from the outlet.
-Let the grinding wheel idle for a while before cutting and grinding.
-Store grinding wheel pieces correctly and put them away when not in use.
-The work area is free of obstacles.
-Do not use cutting blades without reinforced mesh on power tools.
-Do not use damaged grinding wheels.
- It is prohibited to block the cutting piece in the cutting seam.
-When you stop cutting or grinding, the click speed should stop naturally. It is strictly prohibited to manually apply pressure on the grinding disc to prevent it from rotating.
